Wall Panel LED Lighting 04: app control and the wiring it needs

One line on the Wall Panel LED Lighting 04 (6pcs) listing matters more than everything else on it, and the supplier has set it in bold: this pack requires additional wiring to a transformer and a plug, and those are not provided. Read that before anything else here.

What is not in the box

Every other LED pack in this category describes the same short sequence, strip to transformer, transformer to mains, and this one does not. So the parts list for the job is longer than the pack:

• A transformer, sized for the strips you are running.
• A plug or a fused connection, and somewhere to put it that stays accessible.
• Whatever cable the run needs between the two. No cable length is published for these strips, unlike the flexible packs, which state over 180cm per light.
• Someone competent to connect it. Instructions come in the pack, but instructions are not a wiring diagram for your wall.

The listing publishes no voltage, no wattage and no transformer rating. Those three figures are the first things an electrician will ask for, and they are exactly what the page does not have, so get them from the shop before you buy parts. Ordering a transformer against a guess is how a panelled wall ends up half lit.

App control, and the questions that come with it

Control is listed as by application. The app is not named. Nothing states whether it pairs over bluetooth or needs wifi, whether a hub is involved, whether it still works when the broadband is down, or whether more than one phone can be set up. The specification lists no remote, where every other pack in the range does. Be careful with that one, because this page contradicts itself: the opening paragraph still says a remote control is included, which is the sort of sentence a supplier copies between products. Nothing here settles which half is right, so if the lighting is for a rented flat, a holiday let or anyone who would rather press a button than open a phone, ask the shop what actually ships in the box before you order.

The figures as listed

• Six strips: two of 60cm, two of 90cm, two of 150cm.
• Profile 10mm wide by 9mm deep.
• White LED in the specification, although the opening paragraph offers a choice of warm or white. No kelvin figure either, so the exact tone of white is not stated.
• No trim.
• Instructions in the pack.
• Code AWS-WP0150.

No body colour is stated for this one, where Packs 01 and 03 say black, and the first cover image is flagged as an AI generated visual. If the strip will be seen when it is off, ask for a real photograph.

If you would rather plug it in and be done

There is a straight swap. Pack 06 is the same 10mm by 9mm profile in white, with a remote instead of an app, and the plug-in sequence the rest of the range describes. Pack 02 is that profile again in multi-colour. Both sit beside this one on the Panel Lighting page, so the comparison is a minute's work.

When Pack 04 is still the right call

If an electrician is already on site for the room, if the panelling is going up at the same time as new sockets, or if you want the lighting on one proper fixed supply behind the boards rather than a visible plug, then wiring it in is the better job and the app is a reasonable way to control something with no switch near it. That is a real scenario and this pack fits it. Delivery is free within 50 miles of the Glasgow store and £50 beyond. Get the voltage and transformer figures confirmed, then order Wall Panel LED Lighting 04 (6pcs) with the parts list in hand.