Wall Panel 17F Grey Oak: coverage, tone and the missing trim

Wall Panel 17F in grey oak is the wide-slat panel in the tone that sits between the wood finishes and the plain greys. Its listing also differs from the rest of the 17 group in one small way, and that is worth clearing up before the order goes in.

The line this listing leaves out

The other 17 finishes we have listings for name their trim in the description: Wall Panel PVC Trim Acoustic. On 17F that line is simply absent. An omission in the product copy is far more likely than a different panel, since the panel size, the slat width and the spacing are all identical to its siblings. But trims are not interchangeable between profiles, and a strip ordered on a guess is a wasted delivery. Ask the shop to confirm which trim suits this finish and order it with the panels. Trims and corner strips sit in panel trims and fittings.

Grey oak, between the woods and the greys

Grey oak is the finish people reach for when plain grey feels flat and a brown oak feels too warm against a cool floor. The name points at a wood look rather than a flat colour, which is why it gets considered for a room with grey or pale flooring, where a brown panel would fight the floor and a plain grey panel would read as paint. Beyond the name, the listing calls it grey oak and shows it in two photographs, and that is all. There is no colour reference, no sheen level, and no statement of whether the face is a veneer, a foil or a print, so judge it from the photographs and ask the shop if the match to an existing floor is critical.

Pack coverage, and the sum to do first

The listed figures are:

• 60 x 240 x 1.5cm per panel
• Four pieces per pack
• 5.76m2 covered per pack
• Slat width 5cm, space between slats 1cm

Four panels at 60cm make a 2.4 metre run at the listed 240cm height. Measure your wall at the widest point rather than the middle, divide by 2.4 and round up. The 6cm repeat of slat plus gap is also the figure to use when you decide where the cut panel goes: a cut through a gap is far less obvious than a cut through the middle of a slat, and it matters most on the wall you see as you walk into the room.

What else is not stated

The description says the panels are HDF slats with a felt backing that absorb sound and reduce noise transmission. No absorption figure, no NRC and no frequency data is published, so that is a description of what the construction does rather than a measurement of how well. Nor is there a fire rating, a panel weight, a fixing method or any guidance on damp rooms. If the wall is in a kitchen, a utility or anywhere steam reaches, ask before you order rather than after.

Ordering it, and what sits beside it

Order the panels, the trim and the wall panel adhesive in one go, so nothing holds up the fitting. On the same profile, Wall Panel 17A in oak is the warmer choice and Wall Panel 17C in dark grey the plainer, darker one.

The figures, the photographs and the delivery options are on the Wall Panel 17F grey oak page, and the rest of the group is in slat and acoustic panels. Delivery is free within 50 miles of our Glasgow store and £50 beyond.